*Stand and Pillow Sold Separately.
The Hatteras Hammocks® Nantucket Journey Quilted Hammock is two layers of our own proprietary, industry-leading synthetic DuraCord® fabric lockstitched over a 1-inch-thick center of plush, resilient, nonabsorbent polyester fiberfill batting to create 18 individual pillowy cushions that run the entire length of the hammock bed. The top fabric layer is our Nantucket Journey pattern while the bottom and side-binding are a solid neutral color.
Durable Fabrics
Not only is the craftsmanship of our hammocks the highest level of quality, but we also choose the highest quality outdoor fabrics as well. We use our in-house brand DuraCord® Fabric. DuraCord fabric is a leading fabric in the outdoor industry made from 100% solution dyed acrylic. Solution-dyed acrylic, which means the fibers of the fabric are dyed in color before they are woven into the fabric. DuraCord is not only fast-drying but is also resistant to rot, mold, mildew, and staining.
DuraCord Rope
Our own proprietary solution-dyed synthetic blend of rope, DuraCord, blends the softness of cotton with the durability of polyester. Made in the Carolinas, this combination yields a rope that has excellent color steadfastness and superior feel. DuraCord is dyed when spun, producing a rope that is colored all the way through. Like a carrot when sliced open, DuraCord has the same color on both the inside and the outside. Our DuraCord rope is the densest rope on the hammock market at 85 ft./lb., this results in less stretching and increased support when relaxing in your hammock.
Oak Spreader Bar
A wood that is naturally resistant to both rot and insect infestation, and has oils that repel water, Oak blends both exceptional strength and a handsome appearance. Our Oak spreader bars are repeatedly hand-dipped in honey-gold marine-grade varnish allowing a longer outdoor life and exceptional good looks. Our Oak spreader bars are a full 1 inch thick, compared to most other competitor’s spreader bars that measure at ⅞ inch. A thicker spreader bar allows more holes for rope, allowing the hammock bed to sit firmly on the hammock. Our spreader bars also feature countersink drilled holes. Countersink drilling is a technique that uses a trumpet drill bit that produces a hole with no hard angles, allowing the rope to pass through without any sharp edges to wear the rope.
Rolled Rim Grommets with Spur Washers
We are very particular with every aspect of our hammocks even down to the grommets on all our fabric hammocks. Every grommet we use has tiny spurs on the back of the connecting washer forcing part of the fabric into the lip of the grommet itself, creating a more secure bond. We have also experimented with making the fabric around the grommet stronger by sewing an “X” on the fabric before placing the grommet, by adding that extra stitching it gives those tiny spurs more fabric to grip onto. The industry standard, however, is the telescoping grommet, which our testing has shown rips lose from fabric before the rolled-rim grommet every time.
Hardware
We plate all our hanging hardware with Zinc Plated Coating, including both tree hooks that come standard with our hammocks. The zinc plated coating prevents the accumulation of rust and ensures a longer outdoor life. Our very own One-piece ring-knot and chain, a product of years of development, permanently attaches the chain to the O-ring. This produces a hammock that is more durable and most importantly makes it impossible to lose the chain.
Non-absorbent Padding
Each of our Quilted Hammocks is filled with a non-absorbent polyester fiberfill batting that is sewn in between the two layers of fabric. The filling adds a pillow-like softness to the already comfortable fabric hammock. The fiberfill is a nonabsorbent material allowing water to drain through and provide quick drying.
